MONSTER

Dr-Zocchi's Marzocchi MONSTER Extended REPAIR-KIT IN STOCK NOW! This is about a full compatible REPAIR-KIT basicly comparable to Marzocchi Art.-No. 850718, but I have updated and massive extended! The list of parts is long : It will include 2 (!) NEW SEAL-KITs from 2024, some O-Rings, new HQ upper and lower BUSHINGS, an Ahead Cap ‘Fear Nothing’, a FULL SCREW-SET, new Bumpers, both Tools Slider Protector & Oil-Seal Insertion,  etc. This Extended REPAIR-KIT will include MORE parts than the original package No. 850718.

This is about a HQ Bushings-Kit for 40mm Marzocchi MONSTER’s 1999-2006, custom made with best tolerances! Including the very rare ones with outer PTFE! This are NOT standard Moto bushings.👊 You can select out of 2 versions: Standard Kit (4 pcs : 2 upper + 2 lower bushings) Extended Kit (5 pcs : Standard Kit + 1 Piston Bushings) There is a special product bundle for MONSTER's available : SEALS & BUSHINGS(!!) with a big DISCOUNT!

This tool is used for pressing the 38mm oil seal into the lowers top. The smaler bottom section is long enough to keep the tool vertical as this is most impoartant to press the oil seal in! You can also use it to press the dust seal in, but take that little outer ring spring out of the dust seal before you do!!

Original Marzocchi Fork bag. Known to be used for 66, SHIVER DC, 888, DJ, MONSTER etc.

Fork Thrue Axle 183 mm for all Marzocchi MONSTER & SHIVER Forks >2003+. 100% compatible, machined using modern high quality NC processing! Anodized for better surface & corrosion protection! Check here   if you want a screw only!

This product is about a set (2 pcs) new Marzocchi MONSTER 40mm Top Cap.  Available in 3 colours anodized : black, red & alu/silver. ** All Top Cap's includes :** - Top Cap's O-Ring - Deflating Screw - Deflating Screw O-Ring - Torx Bit TX8 (max. 1 pcs per order)

This is about a HQ CNC Marzocchi MONSTER 2. Gen / SuperMONSTER brace in red. It will fit also 1. Gen MONSTER's!

This is about a HQ CNC Custom made Marzocchi MONSTER 1. Gen 40mm Full Flat Top Crown 1 1/8″ bolted (1999-2002) with modern Direct Mount Threads 50x30mm in silver only.

This is about a HQ CNC Custom made Marzocchi 1. Gen MONSTER’s 40mm Full Flat Top Crown 1 1/8″ bolted (1999-2002) with Direct Mounts 51x25mm.

This product is about 1 pcs Marzocchi MONSTER 40mm Top Cap (1999-2002).  Available in 3 colours anodized : black, red & alu/silver. Discount starts with >=2 pcs.

Using this tool you can perfect protect your Marzocchi 40mm forks slider when you try to lever out the oil seal out of the lowers . As you know the Bombers Oil Seal are very good and resists strongly by trying to pull it out. Most comon you will damage your sliders edges and paint without using such a tool! Take care!

This is about a COMPLETE HQ MONSTER Fork Crown Set for Marzocchi SUPER- / MONSTER 2. Gen including a BOTTOM CROWN, a reinforced Aluminium Steerer 1 1/8" (already pressed in) and a custom Full Flat Top Crown, all nicely anodized black (2003-2005). Top crown has DM mounts, you can choose between : - Marzocchi DM Mounts 51x25mm **or** - modern DM Mounts Style 50x30mm

This is about a HQ CNC Custom made Marzocchi SUPER- / MONSTER 2. Gen with modern DM 50×30 Full Flat Top Custom Crown 1 1/8″ bolted black (2003 – 2005).

This is about a HQ CNC Custom made Marzocchi SUPER- / MONSTER 2. Gen DM 51x25 (modern) Full Flat Top Custom Crown 1 1/8" for bolted steerer, black (2003 - 2005).

For all Marzocchi MONSTER forks with 40mm stanchions.

This is about a Seals- & Bushings-Kit for 40mm Marzocchi MONSTER’s 1999-2006.

This is about a HQ CNC shor Direct Mount Stem for Marzocchi SHIVER, MONSTER, Jr. T, Super T, etc. .

This is about a HQ CNC Custom made Marzocchi 1. Gen MONSTER’s 40mm Full Flat Top Crown 1 1/8″ bolted (1999-2002) with Direct Mounts 51x25mm.

This package is about parts you need to SERVICE your Marzocchi MONSTER 40mm with 2x SEAL-Kit & Tools.

This is about a massiv Reinforced Aluminium Steerer developed for Marzocchi Dual + Triple Fork Crowns like SHIVER DC & MONSTER’s & other strong single Crown Forks like the 66, Shiver SC etc. It is known to be much stronger than the older reinforced ones (508995 & 508996), which Marzocchi developed for the 1st Shiver DC’s / Monster’s / Jr. T.’s in 2002/2004. It has a special conic design to take all the forces a suspension fork needs to hold in various environment conditions and is the strongest one the Technical Specialists from Marzocchi had ever made in 2006+. This one replaces older Marzocchi steerer 508995 and 508995. Pressing Service / Steerer Exchange possible!  🛠🧷🔧 ✔

This is about a HQ CNC Direct Mount Stem >> long << for Marzocchi SHIVER, MONSTER, Jr. T, Super T, etc. .

Thrue Axle 20mm for all Marzocchi MONSTER Forks 1999 – 2005, 163mm length. 100% compatible, produced using modern High Quality CNC processing, made out of Air Plane Aluminium 7075!

This is about a HQ CNC Marzocchi MONSTER 2. Gen / SuperMONSTER Brace in red or black polished. It will fit also 1. Gen MONSTER's!