All Products

For Marzocchi Bomber forks with 30mm stanchions. Flanged outer dust seal.

This is about a Marzocchi SHIVER DC Top Flat H34 Crown REINFORCED (2002-2005) rebuild by Dr-Zocchi !! New Drop Crown will be HQ milled out of a Aluminium 7075 T6 block & optimized in strength. This milled version  is much stronger than the original casted one!!🤙

Complete main Seal Kit for Marzocchi Bomber forks with 35mm stanchions. Fits the iconic large-diameter Bomber models from the 2000s like the SHIVER DC and many others.

This is about a HQ CNC shor Direct Mount Stem for Marzocchi SHIVER, MONSTER, Jr. T, Super T, etc. .

This is about a massiv Reinforced Aluminium Steerer developed for Marzocchi Dual + Triple Fork Crowns like SHIVER DC & MONSTER’s & other strong single Crown Forks like the 66, Shiver SC etc. It is known to be much stronger than the older reinforced ones (508995 & 508996), which Marzocchi developed for the 1st Shiver DC’s / Monster’s / Jr. T.’s in 2002/2004. It has a special conic design to take all the forces a suspension fork needs to hold in various environment conditions and is the strongest one the Technical Specialists from Marzocchi had ever made in 2006+. This one replaces older Marzocchi steerer 508995 and 508995. Pressing Service / Steerer Exchange possible!  🛠🧷🔧 ✔

A fresh set of Haribo bags will make your service time much comfortable.

This is about a COMPLETE HQ MONSTER Fork Crown Set for Marzocchi SUPER- / MONSTER 2. Gen including a BOTTOM CROWN, a reinforced Aluminium Steerer 1 1/8" (already pressed in) and a custom Full Flat Top Crown, all nicely anodized black (2003-2005). Top crown has DM mounts, you can choose between : - Marzocchi DM Mounts 51x25mm **or** - modern DM Mounts Style 50x30mm

For Marzocchi forks with 30mm stanchions. Non-flanged outer dust seal for m-arch .

This is about a Marzocchi SHIVER DC Top H52 Crown REINFORCED (2002-2005) reuild by Dr-Zocchi !! New Drop Crown will be HQ milled out of a Aluminium 7075 T6 block & optimized in strength. This milled version  is much stronger than the original casted one!!🤙

Ahead Steerer Cap 1 1/8", logo RIDE FAST - FEAR NOTHING anodized black + High Quality Logo Lasered in the old style!! Remember Josh Bender on his legendary Canfield Secret Weapon!? Check the photo series here . Josh created that Freestyle on DH bikes using special Fully's with Super MONSTER's which fit's perfect to Marzocchi Marketing in the early 20's.

This ROCO Service Tool is not available anymore, no support by manufacture 😵, but there are probably thousands of ROCO's from about 2007 - 2015 out there and lot's of Suspension Centers are in need. The original tool is named COVER PILOT BUSHING KEY.

For all Marzocchi MONSTER forks with 40mm stanchions.

Bushings-Kit (4 pcs) for 35mm Marzocchi SHIVER DC 2001-2005

This product is about a custom made Brace / Arch for Bomber Z1, Z2 and other forks with bolted baces in 3" with ~21mm more clearance for tires like the well known blackSpire Arch. Means you can use FAT tires and even 27" wheels! Designed in cool Marzocchi M-Arch Style! Limited Edition!🖐✨

This is about a HQ CNC produced Semi Integrated Marzocchi M-Stem with nice M(arzocchi) logo lasered on front.  🖐 Limited Edition! 🖐 No spacers, for handlebar clamp 31,8mm.

This is about a HQ CNC Custom made & reinforced Marzocchi BOMBER Z1 30mm Crown 1 1/8″ press-fit (1997+). 👻 There are different options for steerers. This crowns milled out of a block Aluminium 7075 T6 are much stronger then the mass die-casted ones! Read about here! .

This is about a HQ CNC Direct Mount Stem >> long << for Marzocchi SHIVER, MONSTER, Jr. T, Super T, etc. .

M-Arch profile seal kit for Marzocchi forks with 32mm stanchions. Non-flanged outer dust seal.

This product is about a pair of Marzocchi Bomber Z1 Spring for Bombers with 30mm Stanchions 100mm Travel , usually known as Part No. 9 in Z1 drawings.  Springs are original or re-produced! Check compatibility table down here. red = strong green = more strong Usualy you can identify your Springs in the Exploded Drawings for your Fork – please check the MANUALS here !!

For Marzocchi forks with 32mm stanchions. Flanged outer dust seal.

This is about a HQ CNC Custom made Marzocchi SUPER- / MONSTER 2. Gen DM 51x25 (modern) Full Flat Top Custom Crown 1 1/8" for bolted steerer, black (2003 - 2005).

ETA Cartridge MX 2004 ETA - Travel 120

This REBUILD package v2.3 ‘COMPLETE’ is about all you need to rebuild your Marzocchi SHIVER 35mm Fork DIY!! 🎈🎁🛠💊 It includes 2 Set’s of Seals , Tools, including a Set of NEW Bushings! , Knobs, Screws, Marzocchi Ahead Cap, O-Rings & Bits for Cartridge and more! You’ll receive a massive number of parts more than included in the original Marzocchi Repair Set (not available anymore)! Optional you can buy a Set of NEW SHIVER Guards for a Special discounted Price! Also new Top Caps with inflating Screw are available (optional) – you can choose out of 3 colours!! Buy this Package and save >>40%!!